MasterKure 181S - Silane siloxane resin based multi-role curing, sealing, priming & impregnating protective treatment for concrete
How does MasterKure 181 curing agent work?
MasterKure 181S is a non-degrading, membrane forming liquid based on silane siloxane suitable for spray application to freshly poured concrete.
The resultant film retains sufficient moisture in the concrete to ensure full hydration of the cement; essential for optimum strength development. The cured concrete is typically harder and exhibits a dust free surface with a reduced incidence of drying shrinkage cracks. Additionally, the membrane acts as a primer system for many subsequent surface finishes that do not rely on penetration for substrate bond.
When applied to floors, the MasterKure 181S seals and dustproofs the surface, eliminating the primary source of abrasion and enhancing durability.
Where is MasterKure 181S applied?
MasterKure 181S is applied as a more effective and economical alternative to separate curing and priming/sealing regimes. Suitable for use on all concrete surfaces.
- Surfaces subject to finishing treatments.
- Economical enhancement of concrete flatwork.
- In high-rise construction to eliminate the requirement for water.
What are the advantages of MasterKure 181S?
- Eliminates the need for water.
- Imparts a harder dust free surface.
- Does not support the growth of bacteria.
- Non degrading, acts as a primer system.
- Minimal delay for overcoating etc.
- Abrasion resistant floors.
- High curing efficiency.
- Reduced labour costs.
- Reduces chloride penetration.
Downloads
Job References - MasterKure 181S
MasterKure 181S_TDS