Close

Login

Please login with your username and password.

Login

Can’t remember your accounts password?

Can't access your account?

Please select your language

This page is available in the following languages:

    Please select your location

    ​​MasterProtect 8000CI

    Low-viscosity clear liquid which is formulated with penetrative silane treatments for control of moisture ingress and corrosion inhibition

    How does MasterProtect 8000CI work?

    MasterProtect 8000CI is a single component, ready to use, low viscosity, clear liquid which combines the proven effectiveness of penetrative silane treatments for the control of moisture and chloride ion ingress with advanced organofunctional corrosion inhibition.

    Recommended uses:

    MasterProtect 8000CI is particularly suited for the protection of:

    • Bridge decks, piers columns and beams
    • Multi-story carparks, building facades and balconies
    • Marine jetties and structures

    MasterProtect 8000CI is used as part of an overall repair strategy using MasterEmaco repair systems to mitigate corrosion of the embedded reinforcing steel and significantly reduce the possibility of ring or incipient anode induced corrosion of the reinforcing steel.
    MasterProtect 8000CI can be used as a cost effective preventative measure before the onset of corrosion induced problems occur.

    What are the unique features of MasterProtect 8000 CI?

    MasterProtect 8000 CI dramatically reduces chloride and carbonation induced corrosion of concrete steel reinforcement.

    What are the benefits of MasterProtect 8000 CI?

    • Prevents ingress of water borne contaminants - dramatically reduces chloride and carbonation induced corrosion of steel reinforcement
    • Reinstates the passive layer on the outer layers of the reinforcing steel - increases resistance of steel to attack by chlorides already present in the structure. Works at the molecular level to effectively inhibit macrocell (rebar to rebar) and microcell (on the same rebar) corrosion
    • Proven long term effectiveness - global references in service for more than 15 years.
    • Equally effective in high humidity conditions
    • Chemically bonds to steel, cement paste and other silaceous material – will not wash or leach out during wetting / drying cycles, ensuring extended active life
    • Does not discolour or change appearance of concrete – suitable for use on architectural concrete
    • Breathable - allows vapour to leave structure but prevents ingress of liquid water

    Direct contact

    Andrew Sarkady

    Andrew Sarkady

    National Industry Advocate Civil Infrastructure – Transport

    0418 530 763

    Downloads

    MasterProtect 8000 CI: Technical Data Sheet

    pdf (174.37 Kb)

    MasterProtect 8000CI SDS Australia

    pdf (282.21 Kb)