UCRETE UD200 - Heavy Duty Polyurethane Screed

How does UCRETE UD200 work?

UCRETE UD200 provides a lightly textured protective floor finish suitable for applications in wet and dry process environments. It is dense and impervious, providing the ideal floor finish for applications in the food and beverage, pharmaceutical and chemical industries and wherever a robust, long lived floor is required.

UCRETE Industrial Flooring has been widely used throughout industry for more than 40 years, many of the older floors are still in service. A detailed project reference list is available upon request

What makes UCRETE UD200 a unique solution?

UCRETE UD200 is a unique HD Polyurethane resin floor with exceptional resistance to aggressive chemicals, heavy impact and temperatures up to 150°C.

What are the features and benefits of UCRETE UD200?

• Cleaning and Hygiene - UCRETE flooring systems are accredited for use in facilities operating HACCP based food safety systems.
• Temperature Resistance - The UCRETE UD200 resins do not start to soften until temperatures above 130°C are exceeded.
• Non Tainting - UCRETE UD200 is solvent free and non-tainting from the end of mixing, as tested by the Campden Technology Ltd.
• Air quality - UCRETE has been awarded the Indoor Air Comfort Gold Label following extensive VOC emission chamber testing and auditing of quality management and production control procedures.
• Permeability - UCRETE UD200 exhibits zero absorption when tested to CP.BM2/67/2.
• Chemical Resistance - UCRETE UD200 offers exceptional resistance to a wide range of chemical aggressors.
• Impact Resistance - With high mechanical strengths and a low elastic modulus, UCRETE UD200 is very resilient and able to withstand severe impact loads
• Rapid Installation - Specifications are available that enable UCRETE UD200 and primer to be installed and cured within a 12 hour application window.
• Substrate moisture tolerance - UCRETE Industrial Flooring is extremely tolerant to residual substrate moisture and can be installed directly onto 7 day old concrete, or onto old good quality concretes with high moisture contents without the use of special primers, provided there is a functioning DPM within the structure. This enables rapid construction programmes to be main-tained and facilitates refurbishment work in wet process areas.
• Slip resistance - The UCRETE UD200 surface profiles have coefficient of friction as determined as follows:
• EN 13036 Part 4 with 4S rubber on the wet floor :  40 – 45
• DIN 51130: R11
• Colours - UCRETE UD200 is available in eight standard colours: Red, Yellow, Green, Orange, Grey, Cream, Blue, Green/Brown