Close

Login

Please login with your username and password.

Login

Can’t remember your accounts password?

Can't access your account?

Select your language

This page is available in the following languages:

    Please select your location

    • Filter by
    Clear filters and search
    Technical Data Sheets / Guides
    2021/03/08

    MasterEase 3761_TDS.pdf

    Poly Aryl Ether based superplasticizer for the production of high quality ready-mix concrete ... Chloride content : “chloride-free” to BS EN 934-2 ... Other dosages may be recommended in ...

    Technical Data Sheets / Guides
    2021/03/08

    MasterEmaco 310 FC_TDS.pdf

    Mortar / Monolayer coating, for decorating and waterproofing facades ... Impermeable to rainwater and permeable to water vapor ... The water dosage for trowel or spray application is 5.0 to ...

    Technical Data Sheets / Guides
    2021/03/08

    MasterEmaco 320_TDS.pdf

    Coarse/rough-textured Gray Plastering Mortar (20 mm thick ... Evolution of compressive strength (100 mm cubic specimen) and flexural strength (40x40x160 mm prism ... Do not use with risk of ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterEmaco 8100 AP_TDS

    Single component epoxy based zinc rich primer for steel ... The steel surfaces should be or grit blasted or wire brushed to remove all traces of corrosion ... Ensure no oil, grease or dust ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterEmaco FP 100_TDS

    Fire rated mortar for sealing the openings in walls and floors ... : - FSi contribute to Green Building by having a manufacturing policy of 100% recycle and 0% landfill for all products ...

    Technical Data Sheets / Guides
    2021/03/08

    MasterEmaco FP 700_TDS.pdf

    Fire resistant gypsum based mortar material ... Load bearing 2.5k N/m2 UDL ... Acoustic Performance 47 dB reduction at 100 mm ... Max Unsupported Span 700 mm (Consult Master Builders Solutions ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterEmaco N 202_TDS

    A single component cementitious blowhole filler and levelling mortar for cosmetic repairs, and surface leveling to new construction ... It is recommended that only full bags of 25 kg ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterEmaco N 301_TDS

    Single component polymer modified fairing coat and filler for pinholes ... thoroughly soaked prior to application of MasterEmaco N 301, to ensure a saturated, but surface dry condition ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterProtect 1890_TDS

    A high build epoxy liner for applications where abrasion and chemical resistance are required ... Thoroughly mix the base with the reactor and then add in the aggregate to obtain a ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterProtect 1891_TDS.pdf

    High build epoxy resin mortar, specifically designed for vertical and overhead applications ... Service temperature limits: -20°C to 65°C ... limits: 8°C to 45°C ... Pot life at 25°C 120 mins ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterProtect 1892_TDS

    High performance corrosion resistant vinyl ester coating ... All previous surface treatments should be removed taking the surface back to base metal ... The base metal should be abraded and ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterProtect 1896_TDS.pdf

    High performance corrosion resistant vinyl ester coating ... MasterProtect 1896 comprises of vinyl ester resin as base and pre-weighed catalysed as reactor unit ... It can also be used in ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterProtect 190_TDS.pdf

    A two component solvent free high build flexible epoxy polyurethane resin coating system ... Pot life : 30°C 30 mins ... Initial cure : 12 hours at 30°C ... Final cure : 4 days at 30°C ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterProtect 300_TDS.pdf

    Pigmented, elastomeric and protective waterproof and anti-carbonation coating for concrete and concrete structures ... Relative density: 1.3±0.1 at 25°C ... Bond strength ASTM D4541 >2 MPa ...

    Technical Data Sheets / Guides
    2021/03/08

    MasterProtect 8000CI_TDS

    Advanced Organo functional Silane based Corrosion Inhibitor ... - Chemically bonds to steel, cement paste and other siliceous material – will not wash or leach out during wetting ...

    Technical Data Sheets / Guides
    2021/03/08

    MasterProtect 815CP_TDS.pdf

    A free-flowing fast setting grout, for embedding discrete anodes ... Loose particles in the holes should be removed ... Slightly dampen the substrate if possible and remove free standing ...

    Technical Data Sheets / Guides
    2021/02/24

    MasterSeal P 175_TDS

    Flammable liquid do not apply when smoking or near naked flame ... Use in well ventilated areas and avoid breathing of vapor ... In the event of inhalation of concentrated vapor, remove ...

    Technical Data Sheets / Guides
    2021/03/09

    MasterSeal P 640_TDS.pdf

    Single component polyurethane primer for MasterSeal M 640 ... After surface preparation the tensile strength of the substrate should exceed 1N/mm² (check with an approved pull-off ...

    Technical Data Sheets / Guides
    2021/03/09

    MasterSeal P 691_TDS.pdf

    High performance, elastomeric joint sealant (Pouring Grade ... MasterSeal P 691 is a single component material ... Prior to application, it should be conditioned to a temperature of 15°C to ...

    Technical Data Sheets / Guides
    2021/03/09

    MasterSeal P 700_TDS.pdf

    MasterSeal P 700 contains a large proportion of flammable solvent and must not be exposed to a naked flame or sparks ... The flash point (COC) is 35°C. The vapor given off is narcotic ...

    1 to 20 of 333 results
    Items per page