Please login with your username and password.


Can’t remember your accounts password?

Can't access your account?

Select your language.

This page is available in the following languages:

    Please select your location

    MasterRoc MP 309: Low-viscosity, fast-reacting acrylic resin system with high compressive strength for consolidation of sand and silt strata

    Formerly: MEYCO MP 309

    How does MasterRoc MP 309 work?

    MasterRoc MP 309 is a highly reactive two-component acrylic grouting resin with a low viscosity for good penetration. The product cures quickly, forming a hard, compact resin with high compressive strength for ground consolidation.

    MasterRoc MP 309 resin system has been developed for the consolidation of sand- and silt-based strata and for injection into fine joints and fissures in rock. Due to its low viscosity (close to that of water), the resin is particularly well-suited for long flow passages through sandy soil or rock with capillary pores, where polyurethane resins cannot be used for ground improvement. In comparison to colloidal silica (MasterRoc MP 320), MasterRoc MP 309 resin system develops its mechanical strength much faster.

    Recommended uses:

    • Ground consolidation, especially of silty and sandy soils
    • Slope stabilization in rock
    • Repair of concrete cracks

    What are the unique features of MasterRoc MP 309?

    • Very low viscosity
    • Controlled gel time between 3 and 22 minutes at 68 °F (20 °C)
    • Workable between 41 °F (5 °C) and 104 °F (40 °C)
    • Superior flexibility (elongation at break >300%)
    • Good chemical resistance to acids, bases, solvents, fuels, etc.
    • Good bond strength to fractured rock and concrete, even under wet conditions

    What are the benefits of MasterRoc MP 309?

    • Environmentally safe
    • Low viscosity allows deep penetration into very fine fissures and cracks
    • Good assimilation of movements or settlements
    • Durability of more than 10 years
    • Water tightness up to more than 12 bar [174 psi (1.2 MPa)]

    US / Canada Product Information

    Data Sheet

    Safety Data Sheet (SDS):

    MasterRoc MP 309

    MasterRoc MP 309 - Accelerator

    MasterRoc MP 309 - Hardener

    MasterRoc MP 309 - Resin

    Direct contact

    Master Builders Solutions Technical Support

    Admixture Systems


    Safety Data Sheet (SDS)

    Find all available safety data sheets for this product.

    Product Certifications

    Generate a free certificate of conformance for a specific BASF construction product.

    Related Literature

    MasterRoc MP 309 Data Sheet

    pdf (76.11 Kb)

    Underground Water Management Brochure

    pdf (2.85 Mb)