MasterFlow 918 AN - Vinylester resin based anchoring grout

How does MasterFlow 918 AN work?

MasterFlow 918 AN is a two component vinylester resin based anchoring grout for use with threaded rods only into solid substrates. MasterFlow 918 AN produces higher bond strength than polyester.

Where can MasterFlow 918 AN be applied?

Ventilated façades
Canopies
Boilers
Bicycle racks
Hand rails
Masonry supports
Signs
Safety barriers
Balcony fences
Racking
Machinery
Satellite dishes

What are the advantages of MasterFlow 918 AN?

Anchors may be placed close to free edges
Suitable for dry, wet & flooded holes without loss of performance
Reduced drilling diameters i.e. M20 only requires a 22mm hole and M24 requires only a 26mm hole making it an economical injection system  Variable embedment depths
Ratio of 10:1

MasterFlow 150

Powder additive which when mixed with cementitious system imparts shrinkage compensation and high flowability, pumpability to the mix

MasterFlow 410

Solvent-free low exotherm, filler extended grout, based on modified epoxy resin and is designed for use as a precision, heavy duty chocking grout for engineering applications

MasterFlow 520

High strength, non shrink cementitious construction grout

MasterFlow 648

Precision epoxy resin grout, consisting of 3 components – resin, hardener and specially blended inert aggregates

MasterFlow 400

High strength epoxy grout

MasterFlow 870

For all precision, non-shrink grouting applications with clearances of 10mm or more