MasterEmaco P 5000 - Single component, cement based, multi-use, bonding and active protective primer
What is MasterEmaco P 5000?
MasterEmaco P 5000 active primer not only reinstates a high pH environment it also contains active corrosion inhibiting additives for the protection of reinforcement steel. It can also be used as an adhesive bonding slurry for subsequent repair mortars.
When mixed with water, MasterEmaco P 5000 forms a slurry that can be applied by brush to the clean exposed reinforcement, or directly on the dampened, prepared concrete substrate when used as a bonding coat.
How does MasterEmaco P 5000 work?
MasterEmaco P 5000 is used for the protection of reinforcement steel:
- When steel is visible and the available depth of cover is less than 10 mm
- When concrete is contaminated with chlorides
- In critical environments when extra protection is specified
- When the timing at the jobsite does not allow for the repair mortars to be applied immediately after cleaning the steel
MasterEmaco P 5000 can also be used to aid bond and application properties of hand applied repair mortars in extreme thicknesses and conditions.
What makes MasterEmaco P 5000 a unique solution?
MasterEmaco P 5000 meets the needs of the customer for a protective coating for newly cleaned reinforcement steel and as a primer for the application of repair mortars. Its active corrosion inhibiting ingredients make the repair process more efficient by allowing the preparations and application of the repair mortars to be separated by some days without compromising the integrity of the cleaned and prepared steel
MasterEmaco P 5000 can also be used as an adhesive bonding slurry for subsequent repair mortars. When mixed with water, it forms a slurry that can be applied by brush to the clean exposed reinforcement, or directly on the dampened, prepared concrete substrate when used as a bonding coat.
How can you benefit from MasterEmaco P 5000?
- Meets all major international norms - For steel priming in concrete repair systems
- Reinstates high pH environment - Excellent rust-inhibiting properties
- Contains active corrosion inhibitors - To further protect the steel
- Polymer modified - For the additional adhesive bond to the steel
- Good adhesion with overlays - Durable long life repairs
- Wide compatibility - With steel reinforcing bars and concrete or repair mortars
- Fast curing - Enables faster completion of repairs, saving time and money
- Single component – Easy mixing, just add water
- Multi-use - Can also be used as a bonding slurry to improve bond and application thicknesses of MasterEmaco repair mortars on prepared concrete surfaces.
- Light grey/off white colour - For easy site control of reinforcement coverage
- Only use what is needed - Supplied in re-usable air-tight containers
- Low chromate (Cr[VI] < 2 ppm ) - Environmentally friendly and non-hazardous
Explore other MasterEmaco concrete repair solutions
MasterEmaco 820 - Cementitious spray applied repair mortar
Downloads
MasterEmaco P 5000: Technical Data Sheet