Please login with your username and password.


Can’t remember your accounts password?

Can't access your account?

Please select your language

This page is available in the following languages:

    Please select your location

    MasterGlenium ACE 35

    High range water reducing / superplasticising admixture​

    How does MasterGlenium ACE 35 work?

    MasterGlenium ACE 35 is an innovative second generation of polycarboxylic ether polymers superplasticiser.  MasterGlenium ACE 35 meets AS 1478 for Type HWR admixtures. Complies with EN934 Part 2 Table 3 ‘High Range Water Reducing/Superplasticizing’.

    Recommended uses:
    • Suitable for making precast concrete elements at all workabilities including Rheoplastic concrete having fluid consistence, no segregation and low water cement ratio and, consequently, high early and long term strengths.
    • May be used in combination with MasterGlenium Stream admixtures for producing Rheodynamic concrete, capable of self-compaction, even in the presence of dense reinforcement, without the aid of vibration, for making precast elements.
    • Performs best when the concrete temperature is at 15ºC or above.

    What makes MasterGlenium ACE 35 a unique solution?

    The particular molecular configuration of MasterGlenium ACE 35 accelerates the cement hydration.  Rapid absorption of the molecule onto the cement particles, combined with an efficient dispersion effect, exposes increased surface of the cement grains to react with water. As a result of this effect, it is possible to obtain earlier development of the heat of hydration, rapid development of the hydration products and, as a consequence, higher strengths at a very early age.  

    What are the benefits of MasterGlenium ACE 35?

    • Produce Rheoplastic and Rheodynamic concrete having a low water cement ratio
    • Optimise the curing cycles by reducing curing time or curing temperature
    • Eliminate the heat curing
    • Eliminate the energy required for placing, compaction and curing (Zero Energy)
    • Increase productivity/reduction in cycle times
    • Improve surface appearance
    • Produce durable precast concrete elements as per EN206-1
    • As compared to the traditional superplasticisers, the engineering properties such as early and ultimate compressive and flexural strengths, bond to steel, modules of elasticity, shrinkage, creep and impermeability

    Direct contact

    Jason Cichon

    Segment Manager ANZ: Concrete Admixtures

    0407 694 464


    MasterGlenium ACE 35 SDS Australia

    pdf (144.32 Kb)

    MasterGlenium ACE 35 TDS

    pdf (228.59 Kb)